Cup Head Pins & Paper Washer
$25.44 – $255.00
Cup Head Pins with Paper Washer is a fabricated part made up of a weld pin and a staked on retaining washer. Cup Head Pins with Paper Washer installed are usually applied with a capacitor discharge stud welder. They are commonly used for securing insulation and as a hook-less lacing anchor to secure insulation inside fabricated blankets.
Cup Heads are widely accepted as labor-saving fasteners in the thermal and acoustic insulation markets for use in industrial and commercial applications. The most popular style of Cup Head Weld Pins is produced out of a mild steel weld nail with a galvanized-coated mild steel retaining washer.
Specifications:
- Gauge: 12 GA
- Diameter: 0.105 inch
- Length: Ranges from 7/8 inch to 8 inches
- Material: Mild steel with copper plate
You may also like…
-
Boss 180 Anchor Pin System Adhesive
$14.50Boss 180 Anchor Pin System Adhesive is a one-component, moisture-curing adhesive formulated with USP Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS 180Multi-Seal has immediate grab and high bond strength, allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times will be affected by humidity. Each tube covers approximately 200 pins.
FEATURES
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Adhesive can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces
See all the advantages of using Boss 180 Multi-Seal Insulation pin adhesive in the video below from the manufacturer.
https://www.youtube.com/watch?v=XwD8tAdV7qk
-
Round Self-Locking Washers
$8.52 – $216.00Sound Acoustic Solutions stocks round self-locking washer that is manufactured of mild or stainless steel. These insulation washers mount on many types of insulation fasteners for holding insulation material in place. The gauge of the pin, or diameter, should match the fastener it is being affixed. Need fasteners? Browse our expansive offering of perforated based insulation Hangers here.
Self-Locking Washers Round:
- Diameter: 1 inch or 1½ inch
- Material: Mild Steel or Stainless Steel
- Plating: Galvanized
- Edge: Bevel
Need other choices of insulation washers? Visit our insulation fasteners page for more choices.
Related products
-
Green Glue Whisper Clips
$123.00Green Glue Whisper Clips are designed to isolate mid to high frequencies and are excellent at addressing impact noise for interior spaces. Testing proves they are superior in performance to competitive clips. When used in conjunction with Green Glue Noiseproofing Compound, you can prevent over 95% of sound from passing through a conventional wall.
Whisper Clips are designed for maximum low-frequency sound isolation in mind, and will eliminate the bass sounds most commonly found with home entertainment and theater systems. Whisper clips cannot be short-circuited, unlike resilient clips, ensuring maximum sound absorption at all times. Clips do not require special drywall; regular off the shelf product and readily available hat channel are all you need.
Whisper Clips work better, last longer and cannot fail in a fire — no need for double stud or staggered stud, wall assemblies. Clips are installed by screwing them into wall studs. The hat channel is then snapped into the clips and drywall is screwed into the channel.
Green Glue Whisper Clips are sold in quantities of 20.
Product Specifications:
Width: 1.25 inch
Height: 4.25 inch
Depth: 1.125 inch
Weight: .025 Lbs.
Max Spacing: 48” on center
Recommended Load: 36 Lbs. – Three drywall layers
Max Safe Load: 46 Lbs. – Four drywall layers
Fail Load: 300 Lbs. – 27 drywall layers -
Rectangle Self-Locking Washers
$8.12 – $38.00Sound Acoustic Solutions stocks rectangle self-locking washer that is manufactured primarily of Mild Steel and available in only one size. These insulation washers mount on many types of insulation fasteners for holding insulation material in place. The gauge of the pin, or diameter, should match the fastener it is being affixed.
Rectangle Self-Locking Washers:
- Diameter: 1-1/8 inch x 1-1/4 inch
- Material: Mild Steel
- Plating: Galvanized
- Edge Beveled
Need other choices of insulation washers? Visit our insulation fasteners page for more choices.
-
Acoustic Insulation Impaling Clips
$14.99 – $32.00Acoustic Insulation Impaling Clips are the perfect hardware for hanging sound absorbing wall panels on any wall surface. To use, attach the surface impalers to the wall, align the panel, and press the panel against the fastener. The “teeth” of the fastener will capture the core material and hold it firmly in place. To readjust, simply pull the panel away from the fastener, realign and press into place. For drywall installation use screws. For all other installations use an adhesive such as Boss 180 Multi-seal anchor adhesive.
Specifications:
Surface impalers measure 2 inches by 2.3 inches.