Pemko 221AV36 Door Shoes Aluminum U Shape 3″ Door Shoe/Kickplate, Vinyl Bottom Seal, 1-3/4″ Door, 36″
$59.00
The Pemko 221AV Door Bottom Seal, 3-1/2″ Height, For a 1 3/4 Thick Door, And Has a Vinyl Insert, In a Mill Finish Aluminum
Available In 36 Inch length
Pemko 221 AV Door Bottom Seals are used to seal the area under a door with minimal effect on the appearance of the door face. In addition to sealing the gap under the door, door seals are often used to provide protection for the bottom of the door.
Related products
-
SilentFiber™ Fiberglass Boards
SilentFiber™ Fiberglass Boards are rigid yet lightweight acoustic fiberglass boards made for effective and affordable broadband sound absorption. SilentFiber™ Fiberglass Boards are available in various thicknesses with an NRC rating of up to 1.15. These boards are ideal for use in auditoriums, concert halls, public theaters, home theaters and anywhere else where acoustic performance is important. Acoustic Fiberglass Boards are easily cut to size with a utility knife or shears and can be mounted to walls or ceilings.
Available in Dual Density, Mat Faced, and Plain Faced Fiberglass Board varieties.
Effective Sound Absorption: Eliminate unwanted boundary reflections and control excess room reverberation with these fiberglass boards. SilentFiber™ Fiberglass Boards eliminate slap-echo between parallel surfaces and improve signal-to-noise ratio for listening or recording.
Easy Installation: SilentFiber™ Fiberglass Boards are a great choice for custom installations or DIY acoustics. Fiberglass Boards are easily cut to size with a Utility Knife or 6 inches Boning Knife and can be mounted to walls or ceilings. Acoustic fiberglass boards can also be used to create soffit or corner bass traps.
Low-Cost: Not only are acoustic fiberglass boards effective, but they are also affordable. Sound Acoustic Solutions will provide you with the sound of silence within your budget!
-
Acoustic Duct Liner
SilentFiber™ Acoustic Duct Liner also reference as acoustic duct wrap insulation is designed to be applied to interior surfaces of sheet metal ductwork for HVAC systems in residential and commercial applications.
What is it?
The SilentFiber Duct Liner is fiberglass insulation, manufactured from fiberglass wool combined with a high-temperature resistant resin. This product is great at absorbing sound and is sold in rolls. SilentFiber Duct Liner is equipped with a sturdy, non-woven, fiberglass surface that is easily installed with steel hanging accessories. The product is offered in a flexible 1-1/2 pound density material and comes in either a one or two-inch thickness. The one-inch material is available in a 4 ft x 100 ft roll and the two-inch material is available in a 4 ft x 50 ft roll. This product is also resistant to fungi and bacteria growth.For HVAC lagging application, Acoustic duct liner is applied inside the sheet metal ductwork for air systems operating at temperatures from 5°C (40°F) and 121°C (250°F), with the facing exposed to the airflow. The insulation should be secured to the sheet metal ductwork using mechanical fasteners (impact-driven or weld secured) or an appropriate supporting tool.
What problem does it solve?
This product is extremely efficient for heat loss or gain and provides excellent acoustical and thermal capabilities to applied areas. When applied to ductwork, it helps lower energy costs by conserving existing natural energy usage.Where would it be used?
This product is designed to be used on the interior of sheet metal and HVAC systems in commercial and residential applications. When applied to the rafters of metal buildings it is effective at reducing noise reverberations. It also helps absorb light by reducing light reflection for theaters or dark rooms.Sizes Available:
– 1″ Thick – 4 ft x 100 ft Roll
– 2″ Thick – 4 ft x 50 ft RollSpecifications:
- NRC: 0.7 (1 inch) and 0.8 (2 inches)
- Pounds per cubic foot: 1.5t
- R-Value: 4.1 (1 inch) and 7.7 (2 inches)
- Maximum air temperature: 121°C (250°F)
- Thermo-resistance: R=4.3 (H.°F ft²/BTU)
Approved Standards:
- ASTM C1338-00
- ASTM CM411-05
- ASTM C665
- ASTM C795
- ASTM 1304
- UL723
- ASTM C916
- ASTM E84
- ASTM C177
- ASTM C423
- ASTM C167
Acoustic Duct Liner cannot be shipped via fed-ex ground. Please contact us for LTL shipping options at 1-877-399-9697.
-
SilentWrap™ with Lag
SilentWrap™ with Lag is a multi-purpose composite material, primarily used to wrap HVAC ducts, featuring a flexible SilentWrap™ barrier (Mass loaded Vinyl) laminated to an insulating and acoustical Quilted Fiberglass Decoupler on one side, and a protective layer of Foil Scrim Kraft (FSK) on the other.
The fiberglass decoupler is available in 1″ and 2″ variations, providing both thermal and vibration insulation. This combination forms a thin, lightweight acoustical product that provides superior sound transmission loss. The Foil Scrim Kraft outer layer is also a fire rated product and can be used in many commercial applications.
Sound waves originating from the source will be initially absorbed by the fiberglass and then blocked by the mass loaded vinyl. Any reflected sound wave components will be further dissipated into the fiberglass absorber.
Popular Applications Include:
- Home Theaters
- Music Rooms
- Bedrooms, Bathrooms, Basements
- Places of Worship
- Hotels
- Healthcare Facilities
Specifications:
- Will not cause shrink, rot or cause corrosion
- Easily cut with a utility knife
- Specifically designed for sound isolation
- Better sound insulation than normal MLV
- A layer of Fiberglass Decoupler which provides both thermal and sound insulation