$59.00
The Pemko 221AV Door Bottom Seal, 3-1/2″ Height, For a 1 3/4 Thick Door, And Has a Vinyl Insert, In a Mill Finish Aluminum
Available In 36 Inch length
Pemko 221 AV Door Bottom Seals are used to seal the area under a door with minimal effect on the appearance of the door face. In addition to sealing the gap under the door, door seals are often used to provide protection for the bottom of the door.
SilentFiber™ Fiberglass Boards are rigid yet lightweight acoustic fiberglass boards made for effective and affordable broadband sound absorption. SilentFiber™ Fiberglass Boards are available in various thicknesses with an NRC rating of up to 1.15. These boards are ideal for use in auditoriums, concert halls, public theaters, home theaters and anywhere else where acoustic performance is important. Acoustic Fiberglass Boards are easily cut to size with a utility knife or shears and can be mounted to walls or ceilings.
Available in Dual Density, Mat Faced, and Plain Faced Fiberglass Board varieties.
Effective Sound Absorption: Eliminate unwanted boundary reflections and control excess room reverberation with these fiberglass boards. SilentFiber™ Fiberglass Boards eliminate slap-echo between parallel surfaces and improve signal-to-noise ratio for listening or recording.
Easy Installation: SilentFiber™ Fiberglass Boards are a great choice for custom installations or DIY acoustics. Fiberglass Boards are easily cut to size with a Utility Knife or 6 inches Boning Knife and can be mounted to walls or ceilings. Acoustic fiberglass boards can also be used to create soffit or corner bass traps.
Low-Cost: Not only are acoustic fiberglass boards effective, but they are also affordable. Sound Acoustic Solutions will provide you with the sound of silence within your budget!
Perforated Base Insulation Hangers are fabricated out of mild steel with the pin attached for impaling and installation on various acoustic materials such as fiberglass boards or mineral wool boards. These pins feature a 2 inches x 2 inches metal base with a vertical pin attached. The typical perforated insulation pin diameter is 12 gauge (0.105 inches diameter), and self-locking washers are used to lock the material to the pin. We stock various lengths of pins.
Insulation Hangers are generally mounted using general-purpose adhesive such as the Boss 180 Multi-Seal Anchor Adhesive.
Specifications:
SilentFiber™ Acoustic Duct Liner also reference as acoustic duct wrap insulation is designed to be applied to interior surfaces of sheet metal ductwork for HVAC systems in residential and commercial applications.
What is it?
The SilentFiber Duct Liner is fiberglass insulation, manufactured from fiberglass wool combined with a high-temperature resistant resin. This product is great at absorbing sound and is sold in rolls. SilentFiber Duct Liner is equipped with a sturdy, non-woven, fiberglass surface that is easily installed with steel hanging accessories. The product is offered in a flexible 1-1/2 pound density material and comes in either a one or two-inch thickness. The one-inch material is available in a 4 ft x 100 ft roll and the two-inch material is available in a 4 ft x 50 ft roll. This product is also resistant to fungi and bacteria growth.
For HVAC lagging application, Acoustic duct liner is applied inside the sheet metal ductwork for air systems operating at temperatures from 5°C (40°F) and 121°C (250°F), with the facing exposed to the airflow. The insulation should be secured to the sheet metal ductwork using mechanical fasteners (impact-driven or weld secured) or an appropriate supporting tool.
What problem does it solve?
This product is extremely efficient for heat loss or gain and provides excellent acoustical and thermal capabilities to applied areas. When applied to ductwork, it helps lower energy costs by conserving existing natural energy usage.
Where would it be used?
This product is designed to be used on the interior of sheet metal and HVAC systems in commercial and residential applications. When applied to the rafters of metal buildings it is effective at reducing noise reverberations. It also helps absorb light by reducing light reflection for theaters or dark rooms.
Sizes Available:
– 1″ Thick – 4 ft x 100 ft Roll
– 2″ Thick – 4 ft x 50 ft Roll
Specifications:
Approved Standards:
Acoustic Duct Liner cannot be shipped via fed-ex ground. Please contact us for LTL shipping options at 1-877-399-9697.
Pemko 4131CRL Automatic Door Bottom, Surface Mounted, Clear Anodized Aluminum
1 × $74.99 
297AV3684 36" x 84" Standard Perimeter Gasketing with Vinyl Mill Aluminum
1 × $99.00 Subtotal: $173.99
