Pemko 221AV36 Door Shoes Aluminum U Shape 3″ Door Shoe/Kickplate, Vinyl Bottom Seal, 1-3/4″ Door, 36″
$59.00
The Pemko 221AV Door Bottom Seal, 3-1/2″ Height, For a 1 3/4 Thick Door, And Has a Vinyl Insert, In a Mill Finish Aluminum
Available In 36 Inch length
Pemko 221 AV Door Bottom Seals are used to seal the area under a door with minimal effect on the appearance of the door face. In addition to sealing the gap under the door, door seals are often used to provide protection for the bottom of the door.
Related products
-
Pemko PK55D Adhesive Perimeter Gasketing 1/2″ Width, 3/16″ Height, Fire-Smoke Seal, Weatherstripping
$35.00Pemko PK55D Adhesive Perimeter Gasketing 1/2″ Width, 3/16″ Height, 17″ long Fire-Smoke Seal, Weatherstripping
Pemko PK55D Adhesive Perimeter Gasketing 1/2″ Width, 3/16″ Height, Fire-Smoke Seal, Weatherstripping, The Pemko PK55D offers a variety of adhesive-backed smoke and fire gasketing and edge sealing systems, including SiliconSeal, PemkoPrene, silicone triple-fin gasketing, Hot Smoke Seal intumescent edge sealing for Category B doors and combination fire and smoke gasketing. Adhesive-backed material installs easily to the door frame
Features Pemko PK55D PemkoPrene Adhesive Perimeter Gasketing 1/2″ Width, 3/16″ Height, 17″ long Fire-Smoke Seal, Weatherstripping
Excellent resistance to compression set, particularly at elevated temperatures and for extended periods of time
Stays flexible between -40 degrees (F) and 250 degrees (F) with very high resistance to flex fatigue
Outstanding ozone resistance rating
Designed for tighter frames
Demonstrates extremely low closing force
Seal begins compressing at 3/16″; compresses to seal up to a 1/16″ gap -
Acoustic Duct Liner
SilentFiber™ Acoustic Duct Liner also reference as acoustic duct wrap insulation is designed to be applied to interior surfaces of sheet metal ductwork for HVAC systems in residential and commercial applications.
What is it?
The SilentFiber Duct Liner is fiberglass insulation, manufactured from fiberglass wool combined with a high-temperature resistant resin. This product is great at absorbing sound and is sold in rolls. SilentFiber Duct Liner is equipped with a sturdy, non-woven, fiberglass surface that is easily installed with steel hanging accessories. The product is offered in a flexible 1-1/2 pound density material and comes in either a one or two-inch thickness. The one-inch material is available in a 4 ft x 100 ft roll and the two-inch material is available in a 4 ft x 50 ft roll. This product is also resistant to fungi and bacteria growth.For HVAC lagging application, Acoustic duct liner is applied inside the sheet metal ductwork for air systems operating at temperatures from 5°C (40°F) and 121°C (250°F), with the facing exposed to the airflow. The insulation should be secured to the sheet metal ductwork using mechanical fasteners (impact-driven or weld secured) or an appropriate supporting tool.
What problem does it solve?
This product is extremely efficient for heat loss or gain and provides excellent acoustical and thermal capabilities to applied areas. When applied to ductwork, it helps lower energy costs by conserving existing natural energy usage.Where would it be used?
This product is designed to be used on the interior of sheet metal and HVAC systems in commercial and residential applications. When applied to the rafters of metal buildings it is effective at reducing noise reverberations. It also helps absorb light by reducing light reflection for theaters or dark rooms.Sizes Available:
– 1″ Thick – 4 ft x 100 ft Roll
– 2″ Thick – 4 ft x 50 ft RollSpecifications:
- NRC: 0.7 (1 inch) and 0.8 (2 inches)
- Pounds per cubic foot: 1.5t
- R-Value: 4.1 (1 inch) and 7.7 (2 inches)
- Maximum air temperature: 121°C (250°F)
- Thermo-resistance: R=4.3 (H.°F ft²/BTU)
Approved Standards:
- ASTM C1338-00
- ASTM CM411-05
- ASTM C665
- ASTM C795
- ASTM 1304
- UL723
- ASTM C916
- ASTM E84
- ASTM C177
- ASTM C423
- ASTM C167
Acoustic Duct Liner cannot be shipped via fed-ex ground. Please contact us for LTL shipping options at 1-877-399-9697.
-
434APKL36 Mill Finish Aluminum 27/32in. X 1-5/16in. 36in. 1-5/16in.
$99.00Pemko 434APKL Automatic Door Bottom – Full Mortise, Black PemkoPrene Insert, Mill Finish Aluminum
The Pemko 434APKL Full Mortise Automatic Door Bottom effectively seals gaps under doors, preventing air, light, sound, fire, smoke, dust, and moisture from passing through. It is equipped with a low closing force mechanism that activates a drop-down bar upon door closure. This product features a custom cut PemkoPrene seal and can be trimmed up to 2″ on site. Suitable for premium doors, it is reversible for effortless installation on both wood and metal doors.
Features:
Full Mortise
Smoother action positive seal mechanism: Aluminum case encloses a movable drop-bar seal actuated by a jamb-contacting plunger during door closure, providing an effective seal
Drop-bar seal actuation mechanism (all models) ensures hinge-side actuation, preventing seal skidding and door hang up during closure
Fills gaps up to 3/4″
Provided at NET length
Can be trimmed down by as much as 2″ in the field (stock lengths only). If non-stock sizes are ordered, order must note need to trim 2 inches from the size ordered