Acoustic Insulation Impaling Clips
$14.99 – $32.00
Acoustic Insulation Impaling Clips are the perfect hardware for hanging sound absorbing wall panels on any wall surface. To use, attach the surface impalers to the wall, align the panel, and press the panel against the fastener. The “teeth” of the fastener will capture the core material and hold it firmly in place. To readjust, simply pull the panel away from the fastener, realign and press into place. For drywall installation use screws. For all other installations use an adhesive such as Boss 180 Multi-seal anchor adhesive.
Specifications:
Surface impalers measure 3 inches by 4 inches.
You may also like…
-
Perforated Base Insulation Hangers – Box of 200, 1⅝ inches
$23.88Quantity: Box of 200, Size: 1⅝ inches
-
Green Glue Noiseproofing Compound
$159.99 – $475.00Green Glue is a visco-elastic soundproofing compound that, when sandwiched between two layers of a rigid material, greatly reduces the amount of sound transmission through walls or ceilings and reduces the amount of noise generated from impacts on floors. Available in 28 ounces tubes or 5-gallon pails.
Green Glue Noise proofing Compound for acoustics is a unique technology that can benefit both new construction and renovation projects. It is uniquely formulated to dissipate the vibrations caused by sound waves as they travel through ceilings, walls, and floors.
By dampening vibrations, Green Glue can reduce the amount of noise transferring from one side of the structure to the other. Green Glue works so well because it will always remain in a tacky state. Green Glue Noise proofing compound will never dry out and become rigid.
Green Glue Noise proofing Compound is fast and easy to apply. Just cut the tip, attach the nozzle, and Green Glue is ready to dispense using any standard quart-size caulk gun such as the Green Glue Tube Applicator. Apply Green Glue beads evenly over the entire back of the first layer of gypsum or sub flooring. Leave 3 inches on edge for handling. Install the second layer of gypsum or sub-flooring within 15 minutes, using proper screws and screw spacing.
FEATURES:
- Applies in just minutes
- Improves sound transmission loss
- Helps block sound
- Superb low frequency attenuation
- Easy to apply
- Non-toxic
For applying Green Glue, we recommend purchasing the Green Glue Applicator Gun. This caulking gun is designed specifically for easy and precise application of Green Glue.
* * * Green Glue is not a fastening glue; it will not hold the two boards together, so additional fastening is required to keep boards in place. * * *
Related products
-
SilentCeiling™ Cap
SilentCeiling™ Cap is a multi-purpose composite material, primarily used in above ceiling applications to block sound from escaping.
It features a flexible SilentWrap™ barrier (MLV) laminated to a 1 inch insulating and acoustic Quilted Fiberglass Decoupler on one side and a protective layer of Foil Scrim Kraft on the other. Meets ASTM E-84, Class A Rating.
Applications:
- HVAC ducts
- In-wall pipes
- Between room crosstalk
- Exhaust vents
- 2 feet x 2 feet ceiling grids (above)
Dimension range: 23.75 inches x 23.75 inches to 23.75 inches x 47.75 inches
MLV Density: 1#
MLV STC: 29
Fiberglass Decoupler: 0.65 -
Cup Head Pins & Paper Washer
$25.44 – $255.00Cup Head Pins with Paper Washer is a fabricated part made up of a weld pin and a staked on retaining washer. Cup Head Pins with Paper Washer installed are usually applied with a capacitor discharge stud welder. They are commonly used for securing insulation and as a hook-less lacing anchor to secure insulation inside fabricated blankets.
Cup Heads are widely accepted as labor-saving fasteners in the thermal and acoustic insulation markets for use in industrial and commercial applications. The most popular style of Cup Head Weld Pins is produced out of a mild steel weld nail with a galvanized-coated mild steel retaining washer.
Specifications:
- Gauge: 12 GA
- Diameter: 0.105 inch
- Length: Ranges from 7/8 inch to 8 inches
- Material: Mild steel with copper plate
-
SilentFiber™ Acoustic Polyboard 2′ x 4′ Dimension
$300.00SilentFiber™ 2′ x 4′ Polyboards are a sound absorbing polyester board made of recycled synthetic fibers from reclaimed beverage bottle. Polyboard is environmentally friendly and contains no formaldehyde, VOCs, glues or binders. SilentFiber™ Polyboards are available in multiple thicknesses and densities. Polyboard contains no binders or glues that can bleed through or off-gas. SilentFiber™ Polyboards are non-allergenic, non-toxic and they are lightweight. These boards are also customizable. With straight edge and a fresh utility knife, poly board can be cut to fit any space. Available in: Black, Grey, Light Beige, White. Sold in packages of ten. Mounting hardware included.
Specifications:
- 1″ thickness
- 24″ x 48″ Dimension
- Recycled content: 60% post-consumer content, 100% recyclable
- Class A fire rated
- Tackability: SilentFiber Polyboard has excellent tack qualities
- Impact resistant: will not expand, shrink or warp with time
- Zero VOCs