Boss 180 Anchor Pin System Adhesive
$14.50
Boss 180 Anchor Pin System Adhesive is a one-component, moisture-curing adhesive formulated with USP Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS 180Multi-Seal has immediate grab and high bond strength, allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times will be affected by humidity. Each tube covers approximately 200 pins.
FEATURES
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Adhesive can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces
See all the advantages of using Boss 180 Multi-Seal Insulation pin adhesive in the video below from the manufacturer.
https://www.youtube.com/watch?v=XwD8tAdV7qk
Documentation
You may also like…
-
Acoustic Insulation Impaling Clips
$14.99 – $32.00Acoustic Insulation Impaling Clips are the perfect hardware for hanging sound absorbing wall panels on any wall surface. To use, attach the surface impalers to the wall, align the panel, and press the panel against the fastener. The “teeth” of the fastener will capture the core material and hold it firmly in place. To readjust, simply pull the panel away from the fastener, realign and press into place. For drywall installation use screws. For all other installations use an adhesive such as Boss 180 Multi-seal anchor adhesive.
Specifications:
Surface impalers measure 2 inches by 2.3 inches. -
Perforated Base Insulation Hangers
$23.88 – $280.00Perforated Base Insulation Hangers are fabricated out of mild steel with the pin attached for impaling and installation on various acoustic materials such as fiberglass boards or mineral wool boards. These pins feature a 2 inches x 2 inches metal base with a vertical pin attached. The typical perforated insulation pin diameter is 12 gauge (0.105 inches diameter), and self-locking washers are used to lock the material to the pin. We stock various lengths of pins.
Insulation Hangers are generally mounted using general-purpose adhesive such as the Boss 180 Multi-Seal Anchor Adhesive.
Specifications:
- Available in Mild Steel
- Pin and plate manufactured from galvanized steel
- 12 Gauge (0.105 inches) is standard
- 0.105 inch diameter; plate: 2 inches x 2 inches
- Standard Packs are:
– 1,000 for 1 inch to 3.5 inches
– 500 for 4.5 inches to 6.5 inches - Sold by the bag
Related products
-
Cup Head Pins & Paper Washer
$25.44 – $255.00Cup Head Pins with Paper Washer is a fabricated part made up of a weld pin and a staked on retaining washer. Cup Head Pins with Paper Washer installed are usually applied with a capacitor discharge stud welder. They are commonly used for securing insulation and as a hook-less lacing anchor to secure insulation inside fabricated blankets.
Cup Heads are widely accepted as labor-saving fasteners in the thermal and acoustic insulation markets for use in industrial and commercial applications. The most popular style of Cup Head Weld Pins is produced out of a mild steel weld nail with a galvanized-coated mild steel retaining washer.
Specifications:
- Gauge: 12 GA
- Diameter: 0.105 inch
- Length: Ranges from 7/8 inch to 8 inches
- Material: Mild steel with copper plate
-
SilentWrap™ Mass Loaded Vinyl PSA
$335.00Pressure-sensitive Mass loaded vinyl is sold under our brand name SilentWrap™ Mass loaded Vinyl PSA and offers a method to efficiently isolate sound or reduce noise issues by as much as 88%. This product is ideal for commercial and residential spaces such as walls and floors. It allows for adhering directly to the wall or floor substrate. No nails or screws are required for installation. It’s one of the easiest way to hang mass loaded vinyl.
- Easy Installation – Can be cut with a utility knife or shears and is easily installed under standard drywall, above ceilings or under carpeted or floating floors. No special tools or labor required.
- Cost-Effective – Lower total cost than installing multiple drywall layers or pouring additional layers of concrete flooring
- Green Product – SilentWrap is made from post-industrial recycled products
- STC 26
- Roll size 48″ x 25′
- Weight (lb/sq.ft.) – 1.0
- Meets ASTM E90-97
Important Notice: SilentWrap™ Mass loaded Vinyl PSA needs a smooth surface to bond effectively.
Visit our Mass Loaded Vinyl Acoustic Barrier page for other options and densities available to you for ordering. Need help with an order please call us at 1-877-399-9697. Please note that mass loaded vinyl by nature is a heavy material and we do not have any control over the shipping costs.
-
T-Bar Grid Tape
$59.50 – $624.00T-bar Grid Tape is designed to cover the T-bar drop ceiling grid in suspended ceilings to blend in with our line of black acoustic ceiling tile. This line of vinyl delf-adhesive tape achieves a strong bond and is easy to trim with household scissors. When designing or installing our black acoustic ceiling tiles into a drop ceiling grid it may be necessary to cover up the white sections to create a seamless look.
- Installation Type: Standard 15/16-1 in. grid
- Elongation: 150%
- Dimensions 2 in. x 108 Ft
- Material: 0.013 in. thick, rigid vinyl plastic with adhesive backing
- Warning: Not recommended for installation where ceiling temperatures exceed 150°F
- Finish: Satin
Please note: The drop ceiling grid must be dry and free of dust, oils, and contaminants before installation. The tape is resistant to moisture, acids and is highly resistant to abrasions. T-Bar Grid Tape can be easily installed directly to grid.