Green Glue Whisper Clips
$123.00
Green Glue Whisper Clips are designed to isolate mid to high frequencies and are excellent at addressing impact noise for interior spaces. Testing proves they are superior in performance to competitive clips. When used in conjunction with Green Glue Noiseproofing Compound, you can prevent over 95% of sound from passing through a conventional wall.
Whisper Clips are designed for maximum low-frequency sound isolation in mind, and will eliminate the bass sounds most commonly found with home entertainment and theater systems. Whisper clips cannot be short-circuited, unlike resilient clips, ensuring maximum sound absorption at all times. Clips do not require special drywall; regular off the shelf product and readily available hat channel are all you need.
Whisper Clips work better, last longer and cannot fail in a fire — no need for double stud or staggered stud, wall assemblies. Clips are installed by screwing them into wall studs. The hat channel is then snapped into the clips and drywall is screwed into the channel.
Green Glue Whisper Clips are sold in quantities of 20.
Product Specifications:
Width: 1.25 inch
Height: 4.25 inch
Depth: 1.125 inch
Weight: .025 Lbs.
Max Spacing: 48” on center
Recommended Load: 36 Lbs. – Three drywall layers
Max Safe Load: 46 Lbs. – Four drywall layers
Fail Load: 300 Lbs. – 27 drywall layers
Documentation
Related products
-
SilentFiber™ Acoustic Polyboard 2′ x 4′ Dimension
$300.00SilentFiber™ 2′ x 4′ Polyboards are a sound absorbing polyester board made of recycled synthetic fibers from reclaimed beverage bottle. Polyboard is environmentally friendly and contains no formaldehyde, VOCs, glues or binders. SilentFiber™ Polyboards are available in multiple thicknesses and densities. Polyboard contains no binders or glues that can bleed through or off-gas. SilentFiber™ Polyboards are non-allergenic, non-toxic and they are lightweight. These boards are also customizable. With straight edge and a fresh utility knife, poly board can be cut to fit any space. Available in: Black, Grey, Light Beige, White. Sold in packages of ten. Mounting hardware included.
Specifications:
- 1″ thickness
- 24″ x 48″ Dimension
- Recycled content: 60% post-consumer content, 100% recyclable
- Class A fire rated
- Tackability: SilentFiber Polyboard has excellent tack qualities
- Impact resistant: will not expand, shrink or warp with time
- Zero VOCs
-
SilentWrap™ with Lag
SilentWrap™ with Lag is a multi-purpose composite material, primarily used to wrap HVAC ducts, featuring a flexible SilentWrap™ barrier (Mass loaded Vinyl) laminated to an insulating and acoustical Quilted Fiberglass Decoupler on one side, and a protective layer of Foil Scrim Kraft (FSK) on the other.
The fiberglass decoupler is available in 1″ and 2″ variations, providing both thermal and vibration insulation. This combination forms a thin, lightweight acoustical product that provides superior sound transmission loss. The Foil Scrim Kraft outer layer is also a fire rated product and can be used in many commercial applications.
Sound waves originating from the source will be initially absorbed by the fiberglass and then blocked by the mass loaded vinyl. Any reflected sound wave components will be further dissipated into the fiberglass absorber.
Popular Applications Include:
- Home Theaters
- Music Rooms
- Bedrooms, Bathrooms, Basements
- Places of Worship
- Hotels
- Healthcare Facilities
Specifications:
- Will not cause shrink, rot or cause corrosion
- Easily cut with a utility knife
- Specifically designed for sound isolation
- Better sound insulation than normal MLV
- A layer of Fiberglass Decoupler which provides both thermal and sound insulation
-
Cup Head Pins & Paper Washer
$25.44 – $255.00Cup Head Pins with Paper Washer is a fabricated part made up of a weld pin and a staked on retaining washer. Cup Head Pins with Paper Washer installed are usually applied with a capacitor discharge stud welder. They are commonly used for securing insulation and as a hook-less lacing anchor to secure insulation inside fabricated blankets.
Cup Heads are widely accepted as labor-saving fasteners in the thermal and acoustic insulation markets for use in industrial and commercial applications. The most popular style of Cup Head Weld Pins is produced out of a mild steel weld nail with a galvanized-coated mild steel retaining washer.
Specifications:
- Gauge: 12 GA
- Diameter: 0.105 inch
- Length: Ranges from 7/8 inch to 8 inches
- Material: Mild steel with copper plate