Boss 180 Anchor Pin System Adhesive
$14.50
Boss 180 Anchor Pin System Adhesive is a one-component, moisture-curing adhesive formulated with USP Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS 180Multi-Seal has immediate grab and high bond strength, allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times will be affected by humidity. Each tube covers approximately 200 pins.
FEATURES
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Adhesive can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces
See all the advantages of using Boss 180 Multi-Seal Insulation pin adhesive in the video below from the manufacturer.
https://www.youtube.com/watch?v=XwD8tAdV7qk
Documentation
You may also like…
-
Acoustic Insulation Impaling Clips
$14.99 – $32.00Acoustic Insulation Impaling Clips are the perfect hardware for hanging sound absorbing wall panels on any wall surface. To use, attach the surface impalers to the wall, align the panel, and press the panel against the fastener. The “teeth” of the fastener will capture the core material and hold it firmly in place. To readjust, simply pull the panel away from the fastener, realign and press into place. For drywall installation use screws. For all other installations use an adhesive such as Boss 180 Multi-seal anchor adhesive.
Specifications:
Surface impalers measure 3 inches by 4 inches.
Related products
-
T-Bar Grid Tape
$59.50 – $624.00T-bar Grid Tape is designed to cover the T-bar drop ceiling grid in suspended ceilings to blend in with our line of black acoustic ceiling tile. This line of vinyl delf-adhesive tape achieves a strong bond and is easy to trim with household scissors. When designing or installing our black acoustic ceiling tiles into a drop ceiling grid it may be necessary to cover up the white sections to create a seamless look.
- Installation Type: Standard 15/16-1 in. grid
- Elongation: 150%
- Dimensions 2 in. x 108 Ft
- Material: 0.013 in. thick, rigid vinyl plastic with adhesive backing
- Warning: Not recommended for installation where ceiling temperatures exceed 150°F
- Finish: Satin
Please note: The drop ceiling grid must be dry and free of dust, oils, and contaminants before installation. The tape is resistant to moisture, acids and is highly resistant to abrasions. T-Bar Grid Tape can be easily installed directly to grid.
-
Cup Head Pins & Paper Washer
$25.44 – $255.00Cup Head Pins with Paper Washer is a fabricated part made up of a weld pin and a staked on retaining washer. Cup Head Pins with Paper Washer installed are usually applied with a capacitor discharge stud welder. They are commonly used for securing insulation and as a hook-less lacing anchor to secure insulation inside fabricated blankets.
Cup Heads are widely accepted as labor-saving fasteners in the thermal and acoustic insulation markets for use in industrial and commercial applications. The most popular style of Cup Head Weld Pins is produced out of a mild steel weld nail with a galvanized-coated mild steel retaining washer.
Specifications:
- Gauge: 12 GA
- Diameter: 0.105 inch
- Length: Ranges from 7/8 inch to 8 inches
- Material: Mild steel with copper plate
-
Mineral Wool Board
SilentFiber™ Mineral Wool Boards are made from natural stone and recycled content providing superior sound absorbency and fire protection. These boards are an excellent fire barrier, easy to cut with a serrated knife and are resistant to water, rot, mildew and bacterial growth. Additionally, they carry the Greenguard certification.
Mineral Wool Boards offer the best acoustic performance per inch, per pound and per dollar. For superior acoustic performance, and the best broadband absorber of choice on the market consider these boards.
Specification SilentFiber™ Mineral Wool Specs SFW4.4.37×48 SFW6.2.24×48 SFW6.3.24×48 SFW6.4.37.48 SFW8.2.24X48 SFW8.3.24X48 SFW8.4.49X96 Thickness 4 inches 2 inches 3 inches 4 inches 2 inches 3 inches 4 inches Density (Pounds per Cubic Foot) 4 6 6 6 8 8 8 Size (inches) 37 x 48 24 x 48 24 x 48 37 x 48 24 x 48 24 x 48 49 x 96 Package Quantity 3 10 5 1 7 5 1 Effective Sound Absorption: Eliminate unwanted boundary reflections with SilentFiber™ Mineral Wool Boards. The boards are excellent at controlsling excessive room reverberation and eliminates slap-echo between parallel surfaces. Additionally, improve signal-to-noise ratio in any space and achieve NRC ratings up to 1.10. Boards are fireproof with a melting point of 2,150°F.
- Non-corrosive
- Fire resistant
- High impact resistance
- ASTM E84, ASTM C 1104, ASTM C 518