Mineral Wool Board
SilentFiber™ Mineral Wool Boards are made from natural stone and recycled content providing superior sound absorbency and fire protection. These boards are an excellent fire barrier, easy to cut with a serrated knife and are resistant to water, rot, mildew and bacterial growth. Additionally, they carry the Greenguard certification.
Mineral Wool Boards offer the best acoustic performance per inch, per pound and per dollar. For superior acoustic performance, and the best broadband absorber of choice on the market consider these boards.
| Specification SilentFiber™ Mineral Wool | |||||||
| Specs | SFW4.4.37×48 | SFW6.2.24×48 | SFW6.3.24×48 | SFW6.4.37.48 | SFW8.2.24X48 | SFW8.3.24X48 | SFW8.4.49X96 |
| Thickness | 4 inches | 2 inches | 3 inches | 4 inches | 2 inches | 3 inches | 4 inches |
| Density (Pounds per Cubic Foot) | 4 | 6 | 6 | 6 | 8 | 8 | 8 |
| Size (inches) | 37 x 48 | 24 x 48 | 24 x 48 | 37 x 48 | 24 x 48 | 24 x 48 | 49 x 96 |
| Package Quantity | 3 | 10 | 5 | 1 | 7 | 5 | 1 |
Effective Sound Absorption: Eliminate unwanted boundary reflections with SilentFiber™ Mineral Wool Boards. The boards are excellent at controlsling excessive room reverberation and eliminates slap-echo between parallel surfaces. Additionally, improve signal-to-noise ratio in any space and achieve NRC ratings up to 1.10. Boards are fireproof with a melting point of 2,150°F.
- Non-corrosive
- Fire resistant
- High impact resistance
- ASTM E84, ASTM C 1104, ASTM C 518
Documentation
Related products
-
Acoustic Insulation Impaling Clips
$14.99 – $32.00Acoustic Insulation Impaling Clips are the perfect hardware for hanging sound absorbing wall panels on any wall surface. To use, attach the surface impalers to the wall, align the panel, and press the panel against the fastener. The “teeth” of the fastener will capture the core material and hold it firmly in place. To readjust, simply pull the panel away from the fastener, realign and press into place. For drywall installation use screws. For all other installations use an adhesive such as Boss 180 Multi-seal anchor adhesive.
Specifications:
Surface impalers measure 3 inches by 4 inches. -
SilentWrap™ Mass Loaded Vinyl PSA
$335.00Pressure-sensitive Mass loaded vinyl is sold under our brand name SilentWrap™ Mass loaded Vinyl PSA and offers a method to efficiently isolate sound or reduce noise issues by as much as 88%. This product is ideal for commercial and residential spaces such as walls and floors. It allows for adhering directly to the wall or floor substrate. No nails or screws are required for installation. It’s one of the easiest way to hang mass loaded vinyl.
- Easy Installation – Can be cut with a utility knife or shears and is easily installed under standard drywall, above ceilings or under carpeted or floating floors. No special tools or labor required.
- Cost-Effective – Lower total cost than installing multiple drywall layers or pouring additional layers of concrete flooring
- Green Product – SilentWrap is made from post-industrial recycled products
- STC 26
- Roll size 48″ x 25′
- Weight (lb/sq.ft.) – 1.0
- Meets ASTM E90-97
Important Notice: SilentWrap™ Mass loaded Vinyl PSA needs a smooth surface to bond effectively.
Visit our Mass Loaded Vinyl Acoustic Barrier page for other options and densities available to you for ordering. Need help with an order please call us at 1-877-399-9697. Please note that mass loaded vinyl by nature is a heavy material and we do not have any control over the shipping costs.
-
Boss 180 Anchor Pin System Adhesive
$14.50Boss 180 Anchor Pin System Adhesive is a one-component, moisture-curing adhesive formulated with USP Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS 180Multi-Seal has immediate grab and high bond strength, allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times will be affected by humidity. Each tube covers approximately 200 pins.
FEATURES
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Adhesive can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces
See all the advantages of using Boss 180 Multi-Seal Insulation pin adhesive in the video below from the manufacturer.
https://www.youtube.com/watch?v=XwD8tAdV7qk