Noiseproofing Joist Tape.
$64.00 – $69.00
The Green Glue Noiseproofing Joist Tape is 100 linear feet long and available in widths of 1-7/16″ and 2-1/4″. It is effective at solving noisy floors caused by the rubbing of joists or subflooring. Select the width appropriate for your floor joists. The Joist Tape must cover the width of the joists to be effective. Make sure all surfaces are free from dirt, ice, and water before applying the Noiseproofing Joist Tape.
Specs:
– 100 linear feet per roll
– Available in 1-7/16″ width
– Available in 2-1/4″ width
– Roll diameter 16″
Application:
– Apply the Noiseproofing Joist Tape, adhesive side down evenly to the top of each floor joist. This can be done by hand or using the Green Glue Joist Tape Applicator
– Once the placement of the Noiseproofing Joist Tape is complete, apply the sub-floor as normal to joists after being affixed.
Important information:
– The use of construction adhesive is NOT possible when securing the subfloor. Joist Tape should be at least 50°F when applied for the adhesive to ensure the pressure-sensitive adhesive will function.
– Joist Tape is used to address squeaks when the subfloor rubs against the joists and does not provide other acoustical benefits.
You may also like…
-
Green Glue Whisper Clips
$123.00Green Glue Whisper Clips are designed to isolate mid to high frequencies and are excellent at addressing impact noise for interior spaces. Testing proves they are superior in performance to competitive clips. When used in conjunction with Green Glue Noiseproofing Compound, you can prevent over 95% of sound from passing through a conventional wall.
Whisper Clips are designed for maximum low-frequency sound isolation in mind, and will eliminate the bass sounds most commonly found with home entertainment and theater systems. Whisper clips cannot be short-circuited, unlike resilient clips, ensuring maximum sound absorption at all times. Clips do not require special drywall; regular off the shelf product and readily available hat channel are all you need.
Whisper Clips work better, last longer and cannot fail in a fire — no need for double stud or staggered stud, wall assemblies. Clips are installed by screwing them into wall studs. The hat channel is then snapped into the clips and drywall is screwed into the channel.
Green Glue Whisper Clips are sold in quantities of 20.
Product Specifications:
Width: 1.25 inch
Height: 4.25 inch
Depth: 1.125 inch
Weight: .025 Lbs.
Max Spacing: 48” on center
Recommended Load: 36 Lbs. – Three drywall layers
Max Safe Load: 46 Lbs. – Four drywall layers
Fail Load: 300 Lbs. – 27 drywall layers
Related products
-
Green Glue Applicator Gun
$45.99Green Glue Applicator Gun is a tool designed for use with Green Glue Noiseproofing Compound. This is an add-on product and should be purchased with the Green Glue Noiseproofing compound if you don’t have the tool.
Applications
- Acoustical Caulk Applicator
- Green Glue Applicator
- PolyFoam Construction Adhesive
Features
- Easy to use
- Fits standard quart-sized tubes
- Green Glue Applicator or Acoustical Caulk Applicator
-
Mass Loaded Vinyl Anchors
$20.00 – $190.00Mass Loaded Vinyl anchors are our recommended way to adhere MLV to wooden studs or ceiling applications. They are designed with a wide washer head which will assist in dispersing the weight to prevent tearing. MLV should always be installed with these anchors and regular screws or nails should not be used. Sold in Boxs of 100 and a box of 1,000.
• 12 gauge mild steel
• 1″ in length
• 1-3/16″ Head