T-Bar Grid Tape
$59.50 – $624.00
T-bar Grid Tape is designed to cover the T-bar drop ceiling grid in suspended ceilings to blend in with our line of black acoustic ceiling tile. This line of vinyl delf-adhesive tape achieves a strong bond and is easy to trim with household scissors. When designing or installing our black acoustic ceiling tiles into a drop ceiling grid it may be necessary to cover up the white sections to create a seamless look.
- Installation Type: Standard 15/16-1 in. grid
- Elongation: 150%
- Dimensions 2 in. x 108 Ft
- Material: 0.013 in. thick, rigid vinyl plastic with adhesive backing
- Warning: Not recommended for installation where ceiling temperatures exceed 150°F
- Finish: Satin
Please note: The drop ceiling grid must be dry and free of dust, oils, and contaminants before installation. The tape is resistant to moisture, acids and is highly resistant to abrasions. T-Bar Grid Tape can be easily installed directly to grid.
Related products
-
Nashua 357 Spray Adhesive (12pk)
$114.00Nashua 357 Spray Adhesive is designed for temporary and permanent bonding (23.8 fluid ounces can). This low VOC spray adhesive is compliant with state regulations. It can be used to bond fabric, fiberglass insulation, plastic films, felt, rubber, leather, cork, paper, cardboard, urethane foam, foil to metal, wood to wood, and a variety of other substrates.
Fast skin, fast grab, low soak-in spray adhesive. Formulated to bond polyethylene to concrete block, wood, and many other hard-to-bond pieces. Meets FDA requirements for indirect food packaging when used by 21 CFR 175.105.
Nashua 357 Spray Adhesive Specifications:
- Fast skin, fast grab
- Designed for temporary and permanent bonding
- Creates a strong bond for normal hard to bond surfaces
- Low VOC formulation
Size 14 oz Net Wt; 19.6 Fl Oz in Adhesive Rubber Backing/Carrier N/A Color Water White Features Low VOC (<40% by volume) formulation. Fast skin, fast grab, low soak-in spray adhesive. Formulated to bond polyethylene to concrete block, wood, and many other hard-to-bond pieces. May be used to bond carpet and is ideal for label applications. May be used for either permanent or temporary bonds. Applications May be used to bond fabric, fiberglass insulation, duct liner, plastic films, felt, rubber, leather, cork, paper, cardboard, urethane foam, foil to metal, wood to wood and a variety of other substrates. Market Industrial Brand Nashua You are buying a case which includes 12 cans.
-
Boss 180 Anchor Pin System Adhesive
$14.50Boss 180 Anchor Pin System Adhesive is a one-component, moisture-curing adhesive formulated with USP Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS 180Multi-Seal has immediate grab and high bond strength, allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times will be affected by humidity. Each tube covers approximately 200 pins.
FEATURES
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Adhesive can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces
See all the advantages of using Boss 180 Multi-Seal Insulation pin adhesive in the video below from the manufacturer.
https://www.youtube.com/watch?v=XwD8tAdV7qk