Mineral Wool Board
SilentFiber™ Mineral Wool Boards are made from natural stone and recycled content providing superior sound absorbency and fire protection. These boards are an excellent fire barrier, easy to cut with a serrated knife and are resistant to water, rot, mildew and bacterial growth. Additionally, they carry the Greenguard certification.
Mineral Wool Boards offer the best acoustic performance per inch, per pound and per dollar. For superior acoustic performance, and the best broadband absorber of choice on the market consider these boards.
| Specification SilentFiber™ Mineral Wool | |||||||
| Specs | SFW4.4.37×48 | SFW6.2.24×48 | SFW6.3.24×48 | SFW6.4.37.48 | SFW8.2.24X48 | SFW8.3.24X48 | SFW8.4.49X96 |
| Thickness | 4 inches | 2 inches | 3 inches | 4 inches | 2 inches | 3 inches | 4 inches |
| Density (Pounds per Cubic Foot) | 4 | 6 | 6 | 6 | 8 | 8 | 8 |
| Size (inches) | 37 x 48 | 24 x 48 | 24 x 48 | 37 x 48 | 24 x 48 | 24 x 48 | 49 x 96 |
| Package Quantity | 3 | 10 | 5 | 1 | 7 | 5 | 1 |
Effective Sound Absorption: Eliminate unwanted boundary reflections with SilentFiber™ Mineral Wool Boards. The boards are excellent at controlsling excessive room reverberation and eliminates slap-echo between parallel surfaces. Additionally, improve signal-to-noise ratio in any space and achieve NRC ratings up to 1.10. Boards are fireproof with a melting point of 2,150°F.
- Non-corrosive
- Fire resistant
- High impact resistance
- ASTM E84, ASTM C 1104, ASTM C 518
Documentation
Related products
-
SilentWrap™ Mass Loaded Vinyl PSA
$335.00Pressure-sensitive Mass loaded vinyl is sold under our brand name SilentWrap™ Mass loaded Vinyl PSA and offers a method to efficiently isolate sound or reduce noise issues by as much as 88%. This product is ideal for commercial and residential spaces such as walls and floors. It allows for adhering directly to the wall or floor substrate. No nails or screws are required for installation. It’s one of the easiest way to hang mass loaded vinyl.
- Easy Installation – Can be cut with a utility knife or shears and is easily installed under standard drywall, above ceilings or under carpeted or floating floors. No special tools or labor required.
- Cost-Effective – Lower total cost than installing multiple drywall layers or pouring additional layers of concrete flooring
- Green Product – SilentWrap is made from post-industrial recycled products
- STC 26
- Roll size 48″ x 25′
- Weight (lb/sq.ft.) – 1.0
- Meets ASTM E90-97
Important Notice: SilentWrap™ Mass loaded Vinyl PSA needs a smooth surface to bond effectively.
Visit our Mass Loaded Vinyl Acoustic Barrier page for other options and densities available to you for ordering. Need help with an order please call us at 1-877-399-9697. Please note that mass loaded vinyl by nature is a heavy material and we do not have any control over the shipping costs.
-
SilentCeiling™ Cap
SilentCeiling™ Cap is a multi-purpose composite material, primarily used in above ceiling applications to block sound from escaping.
It features a flexible SilentWrap™ barrier (MLV) laminated to a 1 inch insulating and acoustic Quilted Fiberglass Decoupler on one side and a protective layer of Foil Scrim Kraft on the other. Meets ASTM E-84, Class A Rating.
Applications:
- HVAC ducts
- In-wall pipes
- Between room crosstalk
- Exhaust vents
- 2 feet x 2 feet ceiling grids (above)
Dimension range: 23.75 inches x 23.75 inches to 23.75 inches x 47.75 inches
MLV Density: 1#
MLV STC: 29
Fiberglass Decoupler: 0.65 -
Acoustic Duct Liner
SilentFiber™ Acoustic Duct Liner also reference as acoustic duct wrap insulation is designed to be applied to interior surfaces of sheet metal ductwork for HVAC systems in residential and commercial applications.
What is it?
The SilentFiber Duct Liner is fiberglass insulation, manufactured from fiberglass wool combined with a high-temperature resistant resin. This product is great at absorbing sound and is sold in rolls. SilentFiber Duct Liner is equipped with a sturdy, non-woven, fiberglass surface that is easily installed with steel hanging accessories. The product is offered in a flexible 1-1/2 pound density material and comes in either a one or two-inch thickness. The one-inch material is available in a 4 ft x 100 ft roll and the two-inch material is available in a 4 ft x 50 ft roll. This product is also resistant to fungi and bacteria growth.For HVAC lagging application, Acoustic duct liner is applied inside the sheet metal ductwork for air systems operating at temperatures from 5°C (40°F) and 121°C (250°F), with the facing exposed to the airflow. The insulation should be secured to the sheet metal ductwork using mechanical fasteners (impact-driven or weld secured) or an appropriate supporting tool.
What problem does it solve?
This product is extremely efficient for heat loss or gain and provides excellent acoustical and thermal capabilities to applied areas. When applied to ductwork, it helps lower energy costs by conserving existing natural energy usage.Where would it be used?
This product is designed to be used on the interior of sheet metal and HVAC systems in commercial and residential applications. When applied to the rafters of metal buildings it is effective at reducing noise reverberations. It also helps absorb light by reducing light reflection for theaters or dark rooms.Sizes Available:
– 1″ Thick – 4 ft x 100 ft Roll
– 2″ Thick – 4 ft x 50 ft RollSpecifications:
- NRC: 0.7 (1 inch) and 0.8 (2 inches)
- Pounds per cubic foot: 1.5t
- R-Value: 4.1 (1 inch) and 7.7 (2 inches)
- Maximum air temperature: 121°C (250°F)
- Thermo-resistance: R=4.3 (H.°F ft²/BTU)
Approved Standards:
- ASTM C1338-00
- ASTM CM411-05
- ASTM C665
- ASTM C795
- ASTM 1304
- UL723
- ASTM C916
- ASTM E84
- ASTM C177
- ASTM C423
- ASTM C167
Acoustic Duct Liner cannot be shipped via fed-ex ground. Please contact us for LTL shipping options at 1-877-399-9697.