Mineral Wool Board
SilentFiber™ Mineral Wool Boards are made from natural stone and recycled content providing superior sound absorbency and fire protection. These boards are an excellent fire barrier, easy to cut with a serrated knife and are resistant to water, rot, mildew and bacterial growth. Additionally, they carry the Greenguard certification.
Mineral Wool Boards offer the best acoustic performance per inch, per pound and per dollar. For superior acoustic performance, and the best broadband absorber of choice on the market consider these boards.
Specification SilentFiber™ Mineral Wool | |||||||
Specs | SFW4.4.37×48 | SFW6.2.24×48 | SFW6.3.24×48 | SFW6.4.37.48 | SFW8.2.24X48 | SFW8.3.24X48 | SFW8.4.49X96 |
Thickness | 4 inches | 2 inches | 3 inches | 4 inches | 2 inches | 3 inches | 4 inches |
Density (Pounds per Cubic Foot) | 4 | 6 | 6 | 6 | 8 | 8 | 8 |
Size (inches) | 37 x 48 | 24 x 48 | 24 x 48 | 37 x 48 | 24 x 48 | 24 x 48 | 49 x 96 |
Package Quantity | 3 | 10 | 5 | 1 | 7 | 5 | 1 |
Effective Sound Absorption: Eliminate unwanted boundary reflections with SilentFiber™ Mineral Wool Boards. The boards are excellent at controlsling excessive room reverberation and eliminates slap-echo between parallel surfaces. Additionally, improve signal-to-noise ratio in any space and achieve NRC ratings up to 1.10. Boards are fireproof with a melting point of 2,150°F.
- Non-corrosive
- Fire resistant
- High impact resistance
- ASTM E84, ASTM C 1104, ASTM C 518
Documentation
Related products
-
Boss 180 Anchor Pin System Adhesive
$14.50Boss 180 Anchor Pin System Adhesive is a one-component, moisture-curing adhesive formulated with USP Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS 180Multi-Seal has immediate grab and high bond strength, allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times will be affected by humidity. Each tube covers approximately 200 pins.
FEATURES
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Adhesive can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces
See all the advantages of using Boss 180 Multi-Seal Insulation pin adhesive in the video below from the manufacturer.
https://www.youtube.com/watch?v=XwD8tAdV7qk
-
SilentFiber™ Fiberglass Boards
SilentFiber™ Fiberglass Boards are rigid yet lightweight acoustic fiberglass boards made for effective and affordable broadband sound absorption. SilentFiber™ Fiberglass Boards are available in various thicknesses with an NRC rating of up to 1.15. These boards are ideal for use in auditoriums, concert halls, public theaters, home theaters and anywhere else where acoustic performance is important. Acoustic Fiberglass Boards are easily cut to size with a utility knife or shears and can be mounted to walls or ceilings.
Available in Dual Density, Mat Faced, and Plain Faced Fiberglass Board varieties.
Effective Sound Absorption: Eliminate unwanted boundary reflections and control excess room reverberation with these fiberglass boards. SilentFiber™ Fiberglass Boards eliminate slap-echo between parallel surfaces and improve signal-to-noise ratio for listening or recording.
Easy Installation: SilentFiber™ Fiberglass Boards are a great choice for custom installations or DIY acoustics. Fiberglass Boards are easily cut to size with a Utility Knife or 6 inches Boning Knife and can be mounted to walls or ceilings. Acoustic fiberglass boards can also be used to create soffit or corner bass traps.
Low-Cost: Not only are acoustic fiberglass boards effective, but they are also affordable. Sound Acoustic Solutions will provide you with the sound of silence within your budget!
-
Acoustic Duct Liner
SilentFiber™ Acoustic Duct Liner also reference as acoustic duct wrap insulation is designed to be applied to interior surfaces of sheet metal ductwork for HVAC systems in residential and commercial applications.
What is it?
The SilentFiber Duct Liner is fiberglass insulation, manufactured from fiberglass wool combined with a high-temperature resistant resin. This product is great at absorbing sound and is sold in rolls. SilentFiber Duct Liner is equipped with a sturdy, non-woven, fiberglass surface that is easily installed with steel hanging accessories. The product is offered in a flexible 1-1/2 pound density material and comes in either a one or two-inch thickness. The one-inch material is available in a 4 ft x 100 ft roll and the two-inch material is available in a 4 ft x 50 ft roll. This product is also resistant to fungi and bacteria growth.For HVAC lagging application, Acoustic duct liner is applied inside the sheet metal ductwork for air systems operating at temperatures from 5°C (40°F) and 121°C (250°F), with the facing exposed to the airflow. The insulation should be secured to the sheet metal ductwork using mechanical fasteners (impact-driven or weld secured) or an appropriate supporting tool.
What problem does it solve?
This product is extremely efficient for heat loss or gain and provides excellent acoustical and thermal capabilities to applied areas. When applied to ductwork, it helps lower energy costs by conserving existing natural energy usage.Where would it be used?
This product is designed to be used on the interior of sheet metal and HVAC systems in commercial and residential applications. When applied to the rafters of metal buildings it is effective at reducing noise reverberations. It also helps absorb light by reducing light reflection for theaters or dark rooms.Sizes Available:
– 1″ Thick – 4 ft x 100 ft Roll
– 2″ Thick – 4 ft x 50 ft RollSpecifications:
- NRC: 0.7 (1 inch) and 0.8 (2 inches)
- Pounds per cubic foot: 1.5t
- R-Value: 4.1 (1 inch) and 7.7 (2 inches)
- Maximum air temperature: 121°C (250°F)
- Thermo-resistance: R=4.3 (H.°F ft²/BTU)
Approved Standards:
- ASTM C1338-00
- ASTM CM411-05
- ASTM C665
- ASTM C795
- ASTM 1304
- UL723
- ASTM C916
- ASTM E84
- ASTM C177
- ASTM C423
- ASTM C167
Acoustic Duct Liner cannot be shipped via fed-ex ground. Please contact us for LTL shipping options at 1-877-399-9697.